Manuals
Model File Revision
RadiancePro 42xx/44xx/5xxx Download 070621
RadiancePro Setup slides Download 071323
Radiance 2143/2123 Download 041914
Radiance 2020 Download 102214
Radiance 2021/2041 Download 082313
Radiance 2022/2042 Download 082313
Radiance Mini-3D Download 091211
Radiance XS/XS-3D Download 091211
Radiance XD/XE/XE-3D Download 091211
HDMI-HDMI Extender Download 072910
HDMI-CAT6 Extender Download 072910
VisionHDQ Download 030907
VisionDVI & VisionHDP Download 031307
VisionProHDP Download 021706
VisionPro Download 100203
Vision Download 100203
Tech Tips for the Radiance
Tips File Revision
Tip 1- Independent output calibrations Download 040412
Tip 2- Gamut calibration--updated for 9x9x9 point setup Download 081413
Tip 3- Setup with a moveable anamorphic lens Download 032712
Tip 4- Automatic switching of output resolutions Download 070312
Tip 5- Using test patterns Download 112013
Tip 6- Updating the Radiance Download 012016
Tip 7-Setup with a fixed anamorphic lens Download 011818
Tip 8-Viewing subtitles on a 2.35 display Download 081012
Tip 9-Using the IR command input Download 101008
Tip 10-Video input field flip Download 101008
Tip 11-Radiance RS-232 control Download 111023
Tip 12-Radiance IR command interface Download 121813
Tip 13-Radiance direct commands and menu shortcuts Download 071316
Tip 14-Radiance 3D setup with DPI projectors Download 041012
Tip 15-Reporting mode changes from the Radiance to a control system Download 102611
Tip 16-Setting up 2.35 widescreen without using an anamorphic lens Download 071416
Tip 17-Using a 2D AVR in a 3D video system Download 101012
Tip 18-Setup for Single Projector with Dual Screens Download 031113
Tip 19-Installation Notes Download 091713
Tip 20-Watching 4:3 content on 16:9 display Download 112613